Laser Scan to BIM Workflows Training in Lagos, Nigeria by EduCore Global Skills

Module 1: Fundamentals of Laser Scanning and Scan-to-BIM

Core competencies for Fundamentals of Laser Scanning and Scan-to-BIM.

• Introduction to terrestrial laser scanning
• Principles of LiDAR and 3D data capture
• Scan-to-BIM workflow stages
• Accuracy, resolution, and point density
• Applications across architecture, engineering, and construction

Module 2: Laser Scanning Equipment and Field Planning

Core competencies for Laser Scanning Equipment and Field Planning.

• Types of terrestrial laser scanners
• Scanner selection for different projects
• Site assessment and scan planning
• Scanner positioning and coverage strategies
• Field safety and data-quality considerations

Module 3: Point Cloud Data Acquisition

Core competencies for Point Cloud Data Acquisition.

• Scanner setup and calibration
• Capturing interior and exterior environments
• Controlling overlap between scan positions
• Managing reflective and difficult surfaces
• Field quality assurance and completeness checks

Module 4: Registration and Processing of Point Clouds

Core competencies for Registration and Processing of Point Clouds.

• Importing raw scan data
• Target-based and cloud-to-cloud registration
• Coordinate systems and georeferencing
• Cleaning noise and unwanted scan data
• Registration accuracy and quality control

Module 5: Point Cloud Management and Optimization

Core competencies for Point Cloud Management and Optimization.

• Point cloud formats and interoperability
• Segmenting and organizing large datasets
• Decimation and optimization techniques
• Managing high-density point clouds
• Preparing datasets for BIM authoring platforms

Module 6: Autodesk ReCap and Point Cloud Preparation

Core competencies for Autodesk ReCap and Point Cloud Preparation.

• ReCap project setup and workflows
• Importing and indexing scan files
• Cleaning and organizing scan data
• Creating regions and annotations
• Exporting optimized point clouds for BIM use

Module 7: Scan-to-BIM Modeling in Autodesk Revit

Core competencies for Scan-to-BIM Modeling in Autodesk Revit.

• Linking point clouds into Revit
• Establishing levels, grids, and reference planes
• Modeling walls, floors, ceilings, and roofs
• Creating structural and architectural elements
• Modeling directly from point cloud references

Module 8: MEP and Complex Geometry Modeling

Core competencies for MEP and Complex Geometry Modeling.

• Modeling mechanical systems from scans
• Electrical and plumbing components
• Pipes, ducts, equipment, and service routes
• Handling irregular and complex geometry
• Creating custom Revit families from scan data

Module 9: BIM Accuracy, Validation, and Quality Assurance

Core competencies for BIM Accuracy, Validation, and Quality Assurance.

• Level of Detail versus Level of Accuracy
• Comparing BIM models against point clouds
• Identifying modeling deviations
• Clash and tolerance analysis
• Scan-to-BIM QA/QC documentation

Module 10: Advanced Scan-to-BIM Project Delivery

Core competencies for Advanced Scan-to-BIM Project Delivery.

• Existing-condition and as-built BIM models
• Scan-to-BIM for renovation and retrofit projects
• BIM coordination and multidisciplinary workflows
• Deliverables, standards, and client requirements
• End-to-end practical Scan-to-BIM project

How is Laser Scan to BIM Workflows Training delivered?

Laser Scan to BIM Workflows Training is delivered through instructor-led classroom, live online, private in-house corporate training depending on the selected cohort or organizational arrangement.

What are the fees for Laser Scan to BIM Workflows Training?

The published course investment is KES 80,000 and USD 2,500. Location-specific fees are shown where configured.

How long is Laser Scan to BIM Workflows Training?

Laser Scan to BIM Workflows Training runs for 5 Days unless a customized corporate schedule is agreed.

Do participants receive a certificate for Laser Scan to BIM Workflows Training?

Participants who complete the course receive a Certificate of Completion from EduCore Global Skills.

Where can I take Laser Scan to BIM Workflows Training?

Laser Scan to BIM Workflows Training is available in Lagos, Nigeria. Current dates are shown only where real sessions have been configured.

Who should attend Laser Scan to BIM Workflows Training?

Laser Scan to BIM Workflows Training is designed for ICT Officers, IT Managers, Systems Administrators, Cybersecurity Teams, Digital Transformation Leads, Professionals and organizations that need practical capability in Digital Design, CAD, BIM and Engineering.

What are the prerequisites for Laser Scan to BIM Workflows Training?

No mandatory prerequisite is required unless stated in the course outline. Practical workplace experience in the subject area is helpful.